This finishing gelcoat material is formulated with isophthalic resins; it makes it possible to produce coatings of laminates with very good mechanical and thermal properties in a non-aggressive environment.

• Very good mechanical and thermal properties
• Good weather and UV resistance
• Application flexibility

Add 1.5 to 2% PMEC hardener into the gelcoat. Mix well. On a clean, dry and degreased surface, apply a coat of 0.6 to 0.8 mm. The product requires approximately 7 minutes at 20°C in order to take its gel form. It can be applied on polyester resin or polyester putty/filler after sanding, for larger repairs. Complete hardening is obtained in 5 hours at 20°C. Can be diluted if necessary with acetone (5%).

*To receive the Safety Data Sheet please fill in the form in the “Contact” tab