SOROMAP Nauticolle 22

2-component inflatable adhesive for PVC

Κωδικός προϊόντος: SRMP7430

Περιγραφή προϊόντος

Polyurethane adhesive for inflatables. Bonding of elastomeric and plastomeric fabrics of PVC inflatable boats.
Instructions of use: The substrate must be clean, dry and degreased with ΜΕK (PVC in contact with MEC becomes sticky). Let dry.
This adhesive is used with the hardener, at a rate of 4 % (or 40 ml per litre). Mix 4 % of hardener with the desired amount of adhesive. Mix to get an even consistency. Coat the two surfaces using a brush, applying an even film. Leave to dry for 5 to 10 minutes. When the adhesive begins to set, apply a second coat of adhesive. Leave to dry for 10 minutes, then join and press firmly. Adhesion is immediate. Full effectiveness is achieved after 48 hours. This process is carried out ideally at a temperature of 20°C and a relative humidity of less than 65%.

Code Packaging
SRMP74300 750ml
SRMP74302 250ml

 

*To receive the Safety Data Sheet please fill in the form in the “Contact” tab

Έγγραφα

Φόρμα ζήτησης

Τεχνική Υποστήριξη

Στείλτε μας φωτογραφία με το πρόβλημα που θέλετε να διορθώσετε!

Φωτογραφία προβλήματος*. Επιτρεπόμενες μορφές .jpg, .png. Μέγιστο μέγεθος αρχείου 5MB.

Technical Support

Send us a photo of the issue you want to resolve!

Photo with issue*. Allowed formats .jpg, .png. Maximum file size 5MB.