Bonding of Hypalon / Neoprene fabrics.

Instructions for use: The substrate must be clean, dry and degreased with ΜΕK (Neoprene-Hypalon in contact with MEC becomes sticky). Let dry. Sand with grain 180.
This glue is used with its hardener, add 5% of hardener (i.e. 50ml for 1 liter). Mix the 5% hardener to the desired amount of glue. Make a homogeneous mixture. Glue the 2 surfaces to be bonded using a brush, applying a homogeneous film. Let dry 3 to 5 minutes, when the glue begins to erase, reapply a second film of glue. Leave until erase for 3 to 5 minutes, then join and press firmly. The bonding is immediate. Full performance is reached after 48 hours. This application is recommended to be done at a temperature of 20°C and for a rate humidity less than 65%.

*To receive the Safety Data Sheet please fill in the form in the “Contact” tab