Spray enamels brilliant with fast drying, gloss clear lacquer interior finish and anticorrosive primer.

Instructions for use: On finished surface or metal any signs of rust and dirt has to be removed. According to the state of the engine support:

• Sandpaper, clean, let dry.
• Prepare surface to paint. Mask the parts if required to be protected.

To agitate the aerosol well before and during application check the colour frequently. Apply 2 cross layers and keep a distance of 25cm between the spray and the surface. Wait 10 minutes between the two layers.
Time of final drying: 20 minutes in temperature of 20°C. After use to reverse the aerosol and to purge the valve to protect the product from the sun, wind and moisture. Ideal temperature of use: 20°C

*To receive the Safety Data Sheet please fill in the form in the “Contact” tab