It allows the elimination of sludge at the bottom of the tank. Non-foaming product whose ingredients are approved by the Decree of 9/8/1999 on cleaners for surfaces and objects that may come into contact with food and beverages. It leaves no residues or traces on the surfaces to be cleaned. It can be used for cleaning plastic, stainless steel tanks or aluminium tanks. It is not a corrosive product.

Instructions for use: Must always be diluted before use. It is important to cover the sludge with the solution so that the product can work properly. Leave the solution in your tank for approximately 1 hour. Brush the sides if possible. Then add 20 litres of water and empty it, leaving the taps on. Finish the job by rinsing the tank with clean water.

Dilution: 1ltr/3-5ltr of water

*To receive the Safety Data Sheet please fill in the form in the “Contact” tab