Instructions of use
The surface must be clean, dry and dust free. Free oil and grease, sand well before treatment.
Mix the resin with hardener by following the mixing ratio: Resin 98% + Hardener 2%. Do not put more than 3% hardener and less than 1.5%. Apply evenly over the surface to be treated. Spread the fabric band and apply it by pressing with a brush (for example). Then, apply a new layer of resin. After about 20 minutes, you can apply polyester putty/filler normally.
For further information see the documents below
*To acquire the Safety Data Sheet please fill the contact form.