Description
Contains: 250gr of Polyester Resin with 5gr of its hardener and a 25cm x 50cm band of Roving Fabric, ideal for small repairs on polyester surfaces.
Instructions of use
The surface must be clean, dry and dust free. Free oil and grease, sand well before treatment.
Mix the resin with hardener by following the mixing ratio: Resin 98% + Hardener 2%. Do not put more than 3% hardener and less than 1.5%. Apply evenly over the surface to be treated. Spread the fabric band and apply it by pressing with a brush (for example). Then, apply a new layer of resin. After about 20 minutes, you can apply polyester putty/filler normally.
For further information see the documents below
*To acquire the Safety Data Sheet please fill the contact form.