Description
Polyurethane adhesive for inflatables. Bonding of elastomeric and plastomeric fabrics of PVC inflatable boats.
Instructions of use
The substrate must be clean, dry and degreased with ΜΕK (PVC in contact with MEC becomes sticky). Let dry.
This adhesive is used with the hardener, at a rate of 4 % (or 40 ml per litre). Mix 4 % of hardener with the desired amount of adhesive. Mix to get an even consistency. Coat the two surfaces using a brush, applying an even film. Leave to dry for 5 to 10 minutes. When the adhesive begins to set, apply a second coat of adhesive. Leave to dry for 10 minutes, then join and press firmly. Adhesion is immediate. Full effectiveness is achieved after 48 hours. This process is carried out ideally at a temperature of 20°C and a relative humidity of less than 65%.
For further information see the documents below
*To acquire the Safety Data Sheet please fill the contact form.