Description
AF4 antifouling, is made for application on engine supports. Being an aerosol, it can reach the parts that are difficult to paint. Excellent against both marine algae and barnacles. Free of metals, it prevents the formation of marine algae and molluscs.
On new supports: Clean the bare metal and leave to dry.
On old paints: Clean all dirt from the surface, eliminate any surface defect (bubbles, detached areas, etc.). If the nature of the material is unknown complete removal of the old antifouling is recommended. The surface must be clean, degreased and dry.
Instructions of use
Shake well before use. Be sure to apply a protective strip to delimit the surface to be painted. Cover the anodes to prevent them from being covered with antifouling. Spray 4 to 5 layers of AF4 antifouling, 20-25 cm away from the support, using short bursts of spray. To obtain the best finish, apply new coats while previous coats are still damp. Leave to dry for a minimum of 1 hour before putting into the water.
For further information see the documents below
*To acquire the Safety Data Sheet please fill the contact form.