Home Profile Products Links Contact
ABRASIVES
CARPETS - UPHOLSTERY - INFLATABLE FABRICS
CLEANING - MAINTENANCE
COMPOUNDS, WAXES & CLEANERS
EPOXY SYSTEMS
FILLERS - PUTTIES
LETTERS
MARINE PANELS
MASKING FILMS, SHEETING & TAPES
NON SKID
OCCUPATIONAL HEALTH
PAINTS
SEALANTS & ADHESIVES
SOUND ISOLATION
TOOLS
124 Alex. Papanastasiou
(former Vas. Pavlou)
18533 Kastela - Pireus
Tel. +30 210 4112521
el. Fax. +30 210 4136717

Search results about: nautix

One Pot Top Side Enamel

L3 one pack is a long-term high gloss finishing paint with a high resistance against the marine environment. Nautix L3 is formulated according to the most up to date technology resulting in an extremely tough and high gloss finish with very easy application. The selection of the best resins and pigments brings this exceptional brilliance and resistance.

Application by brush, roller or spray gun
Thinner : W.S.
14 m2/ltr per coat
At 15 oC: wait 20 hours between coats

Colours: White, Off white, Ivory, Light grey, Golf green, Spring green, Sky blue, Midnight blue, Blue france, Navy blue, Black, Yellow, Red

0,35 ltr., 0,75 ltr.

High Performance CLR (Controlled Leaching Rate) Antifouling for heavy fouling areas.

A88 is a new technology high performance antifouling. A88 is a very high strength formula adapted for hot water coastal or trans-ocean sailings over any type of vessel. The selection of specific methacrylic copolymer formulated in conjunction with the exclusive CLR technology by Nautix of controlled leaching rate, result a long term selective, systemic and preventive action over the largest scope of fouling.
 
8 m2/ltr per coat
2 coats are recommended
At 15C : wait 3 hours between coats
3 hours before lauching
Recommended primers: Adhesion only Nautix P1 - Epoxy protection: Nautix PE or HPE or U2  - Anticorrosion: Nautix PA or P1 - Wood: Nautix P1.

Colours: Light grey, Blue france, Navy blue, Black, Red

2,5 ltr., 5 ltr.

One Pot Paint for Bilges and Lockers

One pot NAUTIX DB opacity paint builds a very hard and smooth film for a limited adhesion of dust for an easy cleaning of your boat bilges, bulkheads and lockers. Nautix DB has a good resistance to oil and fuel impregnation. Nautix DB can be applied on any material (GRP, epoxy, wood, aluminium, steel) previously coated with the appropriate primer. High resistance to hydrocarbons and detergents.

Application by brush, roller or spray gun
Thinner : W.S.
14 m2/ltr per coat
At 15 oC: wait 20 hours between coats

Colours: White, Grey

0,75 ltr., 2,5 ltr.

Thinner - Cleaner

DA thinner-cleaner can be used with all Nautix antifoulings. This product is particularly recommended to ease application of antifoulings and to clean tools and remove splashes. Nautix DA is also recommended to clean spots of tar and rust. Nautix DA is also the thinner for Nautix Deck Grip one pack non skid paint.

0,75 ltr., 2,5 ltr.

Thinner

Nautix WS thinner is recommended to ease application of L3, U3, Va3 and DB. This product is used for application of undercoats, enamels, one-pot finishing paints and to clean tools and splashes after use.

0,75 ltr.

Thinner

Nautix D.P. thinner is recommended to ease application of PO, IA, PA, P1, PE, HPE, Va2, L2, U2, Nautix grip, Acralu, and White Tspeed and/or to clean tools immediately after use.

Addition of thinner into a 2-pot product must be done after the mix of the 2 components.

0,75 ltr., 2,5 ltr.

Fast drying epoxy filler, solvent free

Nautix epoxy filler is a fast drying epoxy filler 100% watertight. Produced with high quality watertight micronized compounds, this filler is especially recommended to be applied above and below the waterline over fibreglass, rigid woods or metals. Nautix Watertight filler is also recommended to cure osmosis problems or to adjust keel profile.

Fast drying (sandable in 4H at 20C), Nautix Watertight Filler has a high resistance to mechanical and water aggressions. Easy to mix (mixing ratio 1/1 in weight and volume), to apply and to sand, it can be used without shrinking up to 10mm thickness per layer. Nautix watertight is a finishing filler with a super smooth surface.

This filler is solvent free (Benzyl alcohol and phenol free)

Dull thoroughly surface to be filled.
Mixing ratio 1/1 - density 1
At 20C : can be sanded in 4h

Colours: Light pink

250 ml., 2 ltr., 5 ltr., 30 ltr.

Mixed Matrix Antifouling for yachting, cruising, fishing, speed boats.

Marin is an antifouling for sailing, cruising, fishing and fast power boats. MARIN is a best value product for medium fouling area: Marin has an efficiency for seasonal sailing activities, depending on the nature of water. Marin antifouling is recommended for boats been dry sailed or boats grounding at low tide. This antifouling is not suitable for aluminium hulls. Marin can be applied over most other antifouling paints on the market, except self-polishing antifouling.

Medium erosion, copper-based
12,5 m2/ltr per coat
2 coats are recommended
At 15C : wait 3 hours between coats
3 hours before launching
Recommended primers: Adhesion only Nautix P1 - Epoxy protection: Nautix PE or HPE or U2  - Anticorrosion: Nautix PA or P1 - Wood: Nautix P1.

Colours: Grey/White, Navy blue, Black, Red

0,75 ltr., 2,5 ltr., 20 ltr.

Slow Self Polishing Antifouling for yachting, cruising, racing and power boats.

A3 Caribbean is a very high strength antifouling especially formulated for heavy fouling areas and hot water conditions. This antifouling is recommended for yacht or charter fleets sailing in tropical resorts. Nautix A3 Caribbean is not recommended for aluminium hulls and motor boats with cruising speeds over 30 knots. This product can be applied over most other antifouling paints on the market except forbidden TBT (tin) based products.

8,5 m2/ltr per coat
2 coats are recommended
At 15C : wait 3 hours between coats
3 hours before lauching
Recommended primers: Adhesion only Nautix P1 - Epoxy protection: Nautix PE or HPE or U2  - Anticorrosion: Nautix PA or P1 - Wood: Nautix P1.

2,5 ltr, 5 ltr., 20 ltr.

Slow Self Polishing Antifouling Tin & Copper Free for aluminium boats.

A1 is a high resistance antifouling for aluminium hull perfectly protected with efficient isolation paint. Nautix A1 contains an optimum level of copper Thiocyanate compounds for a better efficiency. Corrosion risk is very low except in case of deficient aluminium protection. Nautix A1 Antifouling must be applied over an aluminium protective primer. Check hull protection quality regularly.Nautix A1 can be applied over most other antifouling paints on the market except forbidden tin (TBT) based products.

Recommended primers: Nautix Acralu (1 coat) + Nautix PA (5 coats) or Nautix Acralu (1 coat) + Nautix epoxy PE or HPE or U2 (5 coats).
12 m2/ltr per coat
2 coats of A1 are recommended
At 15C : wait 3 hours between coats
3 hours before lauching

Colours: White, Blue France, Black

0,75 ltr., 2,5 ltr., 5 ltr., 20 ltr.

Hard Matrix Antifouling Tin & Copper Free for propellers, Z-Drive etc.

A7 T.SPEED is a very hard matrix antifouling paint especially formulated for propellers and aluminium Z-Drive. A7 T.SPEED maintains the propeller in a clean condition ensuring correct balance thus reducing vibration and wear of through-hull seals. T.SPEED reduces surface friction to improve propeller output - increasing boat speed or saving fuel. The handy spray can allow an easy application and a smooth finish.

12 m2/ltr per coat (can) and 2 m/spray per coat.
3 to 5 coats are recommended on propeller
At 15C : wait 3 hours between coats (can) /  15 min. between coats (spray)
3 hours before launching (can) / 2 hours before launching (spray)
Recommended primers: Acralu + PA or P7

Colours: Grey, Black

350 ml. (can), 500 ml. (spray)

Hard Matrix Antifouling for inflatable boats.

Nautix A8 is a hard-matrix antifouling paint especially recommended for inflatable boats. A8 is formulated with a lightly flexible resin resisting on tubes small deformations. This product is suitable for boats been dry sailed. Nautix A8 can be directly applied over tubes in a thin coat. A8 works also perfectly well on GRP primed with Nautix P1 or Nautix epoxy primer PE or HPE or U2.

12,5 m2/ltr per coat
2 coats are recommended on gelcoat. One only on tubes.
At 15C : wait 3 hours between coats
3 hours before lauching
Recommended primers for GRP: Adhesion (only) Nautix P1 - Epoxy protection: Nautix PE or HPE or U2.

Colours: White, Grey, Black

0,75 ltr.

Hard Matrix with PTFE (Teflon) Antifouling for fast power and racing boats.

A4T SPEED is a high quality hard-matrix antifouling paint especially recommended for yacht, racing and fast power boats. The A4Tspeed is the antifouling paint selected by the most prestigious racing boats and skippers world wide. A4Tspeed antifouling is recommended for boats in the water all year long but also for boats been dry sailed. T.SPEED means super smooth friction free surface and reduces turbulence to increase speed or to save fuel. This antifouling is not suitable for aluminium hulls. A4Tspeed can be applied over most other hard antifouling paints on the market. Do not apply over self polishing antifouling. Nautix A4Tspeed ultra smooth and low friction surface associated with high antifouling qualities will make perfect and clean hull

12,5 m2/ltr per coat
2 coats are recommended
At 15C : wait 3 hours between coats
3 hours before lauching
Recommended primers: Adhesion only Nautix P1 - Epoxy protection: Nautix PE or HPE or U2  - Anticorrosion: Nautix PA or P1 - Wood: Nautix P1.

Colours: White, Navy blue, Black, Red

0,75 ltr., 2,5 ltr., 20 ltr.

Self-Polishing Antifouling for yachting, cruising and sailing boats.

A3 is a high performance self-polishing antifouling paint especially recommended for yachting, cruising and fishing boats sailing under 30 knots. A self polishing matrix allows to avoid the build-up of paint coats. Nautix A3 antifouling is particularly recommended for boats remaining in water all the year long. Nautix A3 antifouling is not suitable for aluminium boats. This product can be applied over most other antifouling paints on the market.

8,5 m2/ltr per coat
2 coats are recommended
At 15C : wait 3 hours between coats
3 hours before lauching
Recommended primers: Adhesion only Nautix P1 - Epoxy protection: Nautix PE or HPE or U2  - Anticorrosion: Nautix PA or P1 - Wood: Nautix P1.

Colours: White, Blue france, Navy blue, Black, Red

0,75 ltr., 2,5 ltr, 20 ltr.

Hard Matrix Antifouling for speed boats.

A4 is a high quality hard-matrix antifouling paint especially recommended for yacht, racing, fishing and power boats. A4 antifouling is recommended for boats in the water all year long but also for boats been dry sailed or boats grounding at low tide. This antifouling is not suitable for aluminium hulls. Nautix A4 can be applied over most other hard antifouling paints on the market. Do not apply over self polishing antifouling.

12,5 m2/ltr per coat
2 coats are recommended
At 15C : wait 3 hours between coats
3 hours before lauching
Recommended primers: Adhesion only Nautix P1 - Epoxy protection: Nautix PE or HPE or U2  - Anticorrosion: Nautix PA or P1 - Wood: Nautix P1.

Colours: White, Blue france, Navy blue, Black, Red

0,75 ltr., 2,5 ltr., 20 ltr.

Light & solvent free finishing epoxy filler.

Nautix Blue epoxy filler is light weight (density 0.6) and 100% watertight. Produced with high quality micronized watertight compounds, this epoxy filler is especially recommended for fairing or finishing filling application over and below the waterline over GRP, rigid woods or metals. Easy to mix (mixing ratio 1/1 in volume and weight), to apply and to sand, Nautix Blue Filler can be used up to over 5mm thickness without shrinking or for a thin finishing layer before protective primer application.

Nautix Blue epoxy filler is 100% solvent free (Benzyl alcohol and phenol free).

Dull thoroughly surface to be filled.
Mixing ratio 1/1 - density 0.6

Colours: Blue

5 ltr., 30 ltr.

Protective Primer in Spray for propellers and aluminium Z-Drive.

Nautix P7 anticorrosion and adhesion primer is specially formulated to protect propellers and aluminium Z-Drives. P7 improves the adhesion of A7T Speed antifouling but also other paints on GRP surface, bare wood or metal. The handy spray packing is particularly recommended to paint in difficult areas .

Can be applied over aluminium or any other metal after 1 coat of Nautix Acralu.
2 coats recommended
At 15C : wait 1hour between coats and 1 hour max before A7T Speed antifouling application

Colours: Grey

300 ml.

Etch Primer for bare metals.

Nautix ACRALU is an etch primer for pre treatment of aluminium, galvanized steel, zinc, bronze and lead prior protective primer application. A chemical action welds ACRALU to the substrate reinforcing adhesion paints. This product is very easy to use.

Application by brush, roller or spray gun.
Mixing ratio: 1/1.
1 coat only - Coverage 15m/ltr.
At 15C: wait 1h 30 before over-coating.

Colours: Yellow

0,5 ltr., 2 ltr.

One Pot Adhesion Primer for paint adhesion and protection anti corrosion.

Nautix P1 universal primer is recommended to improve adhesion of paints on GRP surface or to protect bare wood or metal. P1 is particularly adapted to improve underwater paint adhesion. Nautix P1 can also be used as a conventional anticorrosion primer, a wood protective primer or as a barrier coat between 2 antifouling. For protection, 2 / 3 coats minimum are recommended.

Application by brush, roller, spray gun
13 m2/ltr per coat
At 15 oC : overcoating after 3 hours
At 15 oC : dry after 6 hours

Colours: Grey

0,75 ltr., 2,5 ltr.

Universal Epoxy White Undercoat for anti-osmosis, anticorrosion.

Nautix U2 is a high coverage two-pot white epoxy undercoat. Easy to apply, this product is the ideal base for L2 enamel. U2 can also be used as an epoxy primer for adhesion of paints or protection of GRP and metals. The U2 high coverage capacity and white colour give a plain aspect to the substrate reinforcing the enamel colour. The U2 undercoat can be polished resulting a shining white paint.

Brush, Roller or Spray application.
Do not apply under 10C.
Thinner: DP.
Coverage: 8 m/ltr per coat.

Colours: White

0,75 ltr., 2,5 ltr.

Two Pot Epoxy Primer for anti-osmosis, anticorrosion.

Nautix PE is a high performance epoxy primer providing outstanding impact and high abrasion resistance qualities. Nautix PE adheres perfectly on well prepared polyester, metallic and wood substrates. PE epoxy primer also ensures a better adhesion and durability of paint (especially antifoulings). Applying 3 to 5 coats builds a watertight barrier of plate technology compounds for osmosis protection of GRP surface and for aluminium already primed with ACRALU etch primer. Nautix PE slow drying system allows long overcoating time management. This solution is recommended for professional application with spray gun.

Application by brush, roller or spray gun
At 15 C : overcoating without sanding between 5 / 10 h
Dull at paper grade 180 imperatively after 20 hours
End dry after 72 hours
12 m2/ltr per coat
Diluant : DP

Colours: Grey, Ivory

0,75 ltr., 2,5 ltr., 5 ltr.

Two Pot High Build Epoxy Primer for anti-osmosis, anticorrosion.

Nautix HPE is a high build epoxy primer providing outstanding adhesion and protection characteristics over fibreglass, wood and metal substrates above or under the waterline. HPE also ensures a better adhesion of paint (especially antifouling). This product is very easy to use, to apply and to sand. Nautix HPE can be applied in one coat of 200 with a roller. Nautix HPE can also be used to seal epoxy filler and fairing works before finishing paints. Applying 3 to 5 coats builds a watertight barrier of plate technology compounds for osmosis protection of GRP and a anticorrosive protection for aluminium and metals.

Application by brush, roller
At 15 C : overcoating without sanding between 5 and 10h
Dull at paper grade 150-180 imperatively after 20 hours
End dry after 72 hours
8 m2/ltr per coat
Diluant : DP

Colours: White, Grey

0,75 ltr., 2,5 ltr.

Two Pot P.U. High Gloss Enamel.

L2 is formulated according to the most up to date technology resulting in an extremely tough and ultra gloss finish with very easy application. The selection of the best compounds brings this exceptional durability. You will notice years after years high resistance in the marine environment thanks to matrix hardness. The two-pot formulation provides very high quality and hardness, exceptional impact and abrasion resistance. L2 is resistant to washing with detergent. This enamel allows fixing due to impact and scratching: sandpaper (wet sand paper grit 600 to 800), apply enamel then sandpaper and polished. Caution: only apply Nauitx L2 enamel over two-top polyurethane enamels, two-pot epoxy primers or polyurethane primers (PA and PO).

Mixing ratio: 3 volumes of base pour 1 volume hardener.
Brush, Roller or Spray application.
Do not apply under 15 C.
Thinner: DP. Undercoat: U2
Coverage: 12 m/ltr per coat.

Colours: White, Off white, Ivory, Light grey, Golf green, Spring green, Sky blue, Midnight blue, Blue france, Navy blue, Black, Red, Orange fluo

0,75 ltr., 2 ltr.

Universal Epoxy White Undercoat for anti-osmosis, anticorrosion.

Nautix U2 is a high coverage two-pot white epoxy undercoat. Easy to apply, this product is the ideal base for L2 enamel. U2 can also be used as an epoxy primer for adhesion of paints or protection of GRP and metals. The U2 high coverage capacity and white colour give a plain aspect to the substrate reinforcing the enamel colour. The U2 undercoat can be polished resulting a shining white paint.

Brush, Roller or Spray application.
Do not apply under 10C.
Thinner: DP.
Coverage: 8 m/ltr per coat.

Colours: White

0,75 ltr., 2,5 ltr.

Two Pot P.U. Varnish

Nautix Va2 is a high quality two pot polyurethane marine varnish offering a perfect surface and a good protection on wood. Va2 varnish gives a high gloss finish, an outstanding resistance in the marine environment to ultraviolet degradation and to oil pregnation. Overcoating polyurethane paint, VA2 enhances shining (except white). Va2 is very easy to apply by brush, roller or spray gun. Va2 is resistant to washing with detergent.

Caution : if you overcoat a paint apply only on top of two-pot polyurethane paint or varnish.

Mixing ratio: 3 volumes of base pour 1volume hardener.
Brush, Roller or Spray application.
Do not apply under 15C.
Thinner: DP.
coverage: 9 m/ltr per coat.

Colours: Gloss, Satine

0,75 ltr., 2 ltr.

One Pot Varnish

VA 3 one-pack marine varnish (gloss or satin) is formulated according to the most recent technology resulting in an extremely tough and brilliant finish with very easy application. The selection of the best compounds brings this exceptional brilliance and durability. VA 3 offers good resistance against the marine environment enhancing wood natural beauty. VA 3 is easy to apply by brush, roller or spray gun.

Brush, Roller or Spray application.
Do not apply under 10C.
Thinner: WS.
Coverage: 15 m/ltr per coat.

Colours: Gloss, Satine

0,75 ltr., 2,5 ltr.

Stripper for antifouling, enamel and varnish.

Nautix AS has been especially formulated to strip antifouling, except those containing tin (TBT). Nautix A.S. is also recommended to remove one pack enamels or varnishes, and nonslip paints (Deck grip or Nautix Grip). Nautix AS is not harmful for GRP and does not contain neither acid nor base. Nautix A.S. is a degradable product to respect the E.C. directive concerning boat hull cleaning: no soil pollution, no use of fresh water. Waste can be easily collected. The antifouling stripping is easier if it's carried out every 2-3 years.

New technology stripper: non agressive for gelcoat neither epoxy primers. Nautix AS is made of degradable products. For the best applicator protection, Nautix AS do not produce dust. 100% of wastes can be collected in a bin. (EC directive).
Apply a thick coat over a 1 sqm area. Leave 30 min to impregnate.
Scrape off with a metalic spatula.
Clean with Nautix DA or SD and sand with 320 paper grade when dry.
Coverage : 3-4 m2/ltr

0,75 ltr., 2,5 ltr.

Anticorrosion Protection System for keel treatment.

This anti-corrosion system is made of a pore-plugged impregnation paint (Nautix IA) and a protective paint (PA). Nautix IA and PA are one-pot polyurethane paints. They are formulated with a resin base which hardens by reacting with moisture in the air. These one-pot products are easy to use in most weather conditions (temperature above 0C). This system ensures a long term protection of metallic surfaces against corrosion in marine environment, particularly iron keels or steel boats. Nautix I.A. can be applied on bare metal (one thin coat is enough). Nautix I.A. must be overcoated by one or more coats of Nautix PA. PA can be overcoated by antifouling below the waterline or by a system of undercoat and enamel above the waterline.

Very easy to use - very watertight.
This paint system hardens by reacting with moisture in the air.
Application preferably by brush, also possible by roller or airless spray gun.
Apply one coat of I.A on a bare metal, for absorption by substrate, then overcoat with 2 coats of P.A.
I.A. : 16 m2/ltr per coat - P.A. : 14 m2/ltr per coat
A 15C : wait 5 hours between 2 coats (both products)

Colours: IA: Grey /  PA: Red brown

0,35 ltr., 0,75 ltr.

Undercoat for One Pot Enamel

Nautix U3 is a one-pack white high coverage undercoat enamel. U3 must be applied after protective primers, fillers and sanded substrate. The U3 high coverage capacity and white colour give a plain aspect to the substrate enlighting the L3 enamel colour. U3 can also be used to paint inside chests.

Can be applied over wood, GRP or recommented primer.
Application by brush, roller or spray gun
Thinner : W.S.
14 m2/ltr per coat
At 15 oC: wait 20 hours between coats

Colours: White

0,75 ltr.

Two Pot Non-Slip Paint (Transparent)

NAUTIX GRIP is a two-pack colourless non-slip paint formulated to give the best feet adhesion and an outstanding resistance in the marine environment and to ultraviolet degradation and hydrocarbon. NAUTIX GRIP formulation provides very high long lasting quality, hardness and abrasion resistance. Nautix Grip is also resistant to washing with detergent. NAUTIX GRIP can be applied over polyester (GRP), epoxy (resin or paint), polyurethane twopack enamel or 2 pack varnish, wood or thermoformed substrates. NAUTIX GRIP may be coloured with L3.

Can be applied deck, wood, companion way or deck hatches without blocking the light - High resistance to abrasion and UV
2-pot paints - mixing ratio
- in weight : 85gr base / 15gr curing agent
- in volume 2 volume of base for 1 volume curing agent.
Application by soft foam roller (stear well the roller before application) or low pressure spray gun.
Do not apply under 15C.
Thinner: Nautix DP - Can be mixed with L3 enamel (up to 30%)
Coverage: 8 m/kgr

500 gr., 3 kgr.

One Pot Non-Slip Paint

DECK GRIP is a one-pack non-skid deck paint (colourless, grey or ivory) providing a good feet adhesion on deck or companion way steps, etc. Nautix DECK GRIP can be applied over polyester (GRP), epoxy (resin or paint), one- or twopack enamels or varnishes and wood. This one pack paint is easy to apply. The formulation of the product provides very high quality and hardness, good impact and abrasion resistance. This paint provides an outstanding resistance in the marine environment and is also resistant to washing with detergent.

Can be applied deck, companion way ordeck hatches without blocking the light - Good resistance to abrasion and UV
Application by soft foam roller (stear well the roller before application) or low pressure spray gun.
Do not apply under 15C.
Drying time at 15C: 6 hours
Thinner: Nautix DA
Coverage: 8 m/ltr

Colours: Transparent, Grey, Ivory

500 gr., 3 kgr.

Nautix Non Skid compounds is a special powder to be mixed in one or two pack paints. The selection of different size grid improve foot adhesion on deck. Nautix Non Skid Compounds can be added to one or two pot finishing enamels or varnish.

Mixing ratio 200 gr of compounds for 0.75 ltr of paint.

200 gr., 1 kgr.

Solvent - Degreaser

Nautix SD is especially recommended to degrease surfaces to be painted, including GRP new hulls, to eliminate wax and moulding tracks. SD. is a powerful solvent recommended for cleaning the tools used for resin application. This product is less volatile and flammable than acetone. Do not use this product on hatch cover and porthole.

Apply with a cloth (quick evaporation)

0,75 ltr., 2,5 ltr.

Copyright © 2007 Marineshop All rights reserved Designed and developed by HellasSites